Saturday, October 20, 2018
All News
Astronics Advanced Electronic Systems Awarded Aircraft Power Contracts with Multiple Asia-Pacific
April 2, 2018
EAST AURORA, N.Y.--(BUSINESS WIRE)--Astronics Corporation (NASDAQ: ATRO), a leading provider of advanced technologies for the global aerospace, defense and semiconductor industries, announced today that its wholly owned subsidiary, Astronics Advanced Electronic Systems (AES), has been selected by multiple Asia-Pacific airlines to install the
Kyzen to Co-Host VOC Compliance Seminars
April 2, 2018
Kyzen (Nashville, Tennessee) will co-host two volatile organic compound (VOC) compliance seminars for the metal parts manufacturing industry. The first will take place April 18-19, 2018, at Stericycle in California. The second seminar will take place May 23-24, 2018, at Ecoclean in Michigan. The technical sessions of
Iscar Leader Describes Tool Technology for Machine Shops Acting on Data
April 2, 2018
As more sophisticated insight into machining performance reveals opportunities for efficiency gain, the value of tooling choices that save time will become increasingly clear. Blog Post: 3/6/2018 Peter Zelinski Editor-in-Chief, Modern Machine Shop The promise of Industry 4.0 is great news for the adoption of advanced cutting tools. The reason: In
Capitalizing on B Axis for Optimization
April 2, 2018
Momentum has been strong in U.S. manufacturing, largely driven by productivity increases from investments in more efficient machines, tooling and automation and the process improvements shops realize with such advancements in technology. The over-arching goal in implementing these improvements is the reduction of cycle time. Taking mere seconds out
Consider the Software Side of Cutting Tools
April 2, 2018
Data is the driver for today’s manufacturing. Collecting and analyzing data, in real time about what is happening or not happening on the shop floor is of vital importance to being successful. Having the correct information where and when it is needed is a prelude to the actual cutting of the workpiece. Job setup includes the hard
Laser Control Features Tablet-Style Touchscreen Interface
April 2, 2018
Mitsubishi Laser has added its M800 control technology to the Advanced 800-series eX-F fiber laser machine. The laser control includes a 19" tablet-style touchscreen, enabling users to swipe, pinch and tap to view data. It features a customizable home page and status bar to access data, meaning less time spent pressing various buttons to perform
DROs Offer Useful Software Features
April 2, 2018
Heidenhain’s Acu-Rite brand has released a line of three digital readouts (DROs) with software features and hardware for milling, turning, grinding and boring applications New Product Post: 4/2/2018 Heidenhain’s Acu-Rite brand has released a line of three digital readouts (DROs) with software features and hardware for milling, turning,
You Wear What You Eat… New Materials Start-up ‘Circular Systems’ Wins H&M
April 2, 2018
NEW YORK--(BUSINESS WIRE)--Circular Systems S.P.C. (Social Purpose Corporation) is a materials science company focusing on converting agricultural, industrial and post-consumer wastes into high value textile fibers for the fashion industry. The company was confirmed as the first place winner of the 2018 Global Change Award, which recognizes the
Praxair Announces First Quarter 2018 Earnings and Conference Call Schedule
April 2, 2018
DANBURY, Conn.--(BUSINESS WIRE)--Praxair, Inc. (NYSE:PX) will release its first quarter 2018 financial results on Thursday, April 26, 2018, before the market opens and will webcast its conference call at 11:00 a.m. ET that morning. Following are details for the call and webcast, which will be available to the public and the media in listen-only
2018 Jeep Wrangler: Some Things to Know
April 2, 2018
Although the Jeep Wrangler seems to have been around approximately forever, in point of fact the vehicle has been around only since 1986, and the 2018 model, the JL, is but the fourth generation of the vehicle that truly speaks of the “go anywhere, do anything” brand promise, a promise that from its design through engineering and
CAM Software Helps Shop Five-Axis Machine Aerospace Part
April 2, 2018
A five-axis machine and HyperMill CAM software from Open Mind Technologies gave a shop the ability to meet the tight tolerances required for the camera-mounting brackets on a NASA satellite mission. Blog Post: 2/17/2018 Edited by Julia Hider Assistant Editor, Modern Machine Shop Critical parts require tight tolerances, and these tolerances often
Hexion to Introduce New Hybrid Epoxy/Polysiloxane Resin at American Coatings Show
April 2, 2018
COLUMBUS, Ohio--(BUSINESS WIRE)--Hexion Inc. (“Hexion” or the “Company”) will showcase a new hybrid epoxy/polysiloxane resin during the 2018 American Coatings Show that offers superior performance in protective coatings. When cross-linked with aminosilanes, topcoats that incorporate Hexion’s EPOSIL Resin 5550 offer
Arcimoto Reports Full Year 2017 Financial Results and Provides Business Update
April 2, 2018
EUGENE, Ore.--(BUSINESS WIRE)--Arcimoto, Inc.® (NASDAQ: FUV), makers of the world’s first Fun Utility Vehicle® (FUV®) — an affordable and practical pure electric vehicle for everyday commuters and fleets — today announced financial results for the fiscal year ended December 31, 2017 and provided a business
L3 to Exhibit at FIDAE 2018 International Air and Space Fair in Santiago, Chile
April 2, 2018
NEW YORK--(BUSINESS WIRE)--L3 Technologies announced today that it will feature its advanced sensor system technologies and aircraft integration and platform solutions at the 20th annual FIDAE International Air and Space Fair, April 3 through 8, in Santiago, Chile. “South America is an emerging international market for L3, and our
HoldTight Solutions Announces Release of New Product HT365
April 2, 2018
HOUSTON--(BUSINESS WIRE)--HoldTight Solutions Inc., one of the most trusted names for surface preparation in the coating industry, announced today the release of its latest product HT365, a new thin-film coating that can be applied to blasted surfaces, preserving the quality of the prepared surface and preventing flash rust and corrosion for up to
Teledyne Marine Receives Spotlight on New Technology Award
April 2, 2018
DAYTONA BEACH, Fla.--(BUSINESS WIRE)--Teledyne Marine, a division of Teledyne Technologies Incorporated (NYSE:TDY), was recently recognized by the Offshore Technology Conference (OTC), the largest global industry event for oil and gas, with a 2018 Spotlight on New Technology Award for the FlameGuard™ P5-200. OTC recognizes innovative
Three Guys Walk into a Studio. . .
April 2, 2018
At this year’s Detroit Auto Show—officially known as the “North American International Auto Show,” and not just because it is across the river from Canada—there were several new vehicle introductions, as is the case with auto shows. In terms of volume, the most important is undoubtedly the next Chevrolet Silverado.
Former WH Chief Economist to Speak at NASF Washington Forum
April 2, 2018
Dr. Doug Holtz-Eakin served as chief economist of President George W. Bush’s Council of Economic Advisors in 2000-2001 and was director of the nonpartisan Congressional Budget Office in 2003-2005.  Dr. Doug Holtz-Eakin will kick off the NASF Washington Forum on Tuesday, April 17, at the Ritz Carlton-Pentagon City, in
NGL Energy Partners LP Announces Closings of Retail Propane Sale and Sawtooth Joint Venture and
April 2, 2018
TULSA, Okla.--(BUSINESS WIRE)--NGL Energy Partners LP (NYSE:NGL) (“Partnership”) today announced that it has closed the previously announced transaction to sell a portion of its Retail Propane business to DCC LPG for $200 million in cash, adjusted for working capital. NGL announced this transaction in November 2017, closed the
Five-Axis Front and Center at Hurco's 50th-Anniversary Event
April 2, 2018
Machine tool builder Hurco had its five-axis technology on display, and provided attendees with a sneak peek at two other machining center models that will be introduced at this year's International Manufacturing Technology Show. Blog Post: 4/2/2018 Eli Plaskett Assistant Editor, Modern Machine Shop Putting five-axis machines front and center,
Global Steel Casting Market - Increasing Investments in Infrastructure to Drive Growth| Technavio
April 2, 2018
LONDON--(BUSINESS WIRE)--The global steel casting market is expected to grow at a CAGR of more than 4% during the period 2018-2022, according to a new market research study by Technavio. The report presents a comprehensive research of the global steel casting market by application, including automotive and transportation, construction and
Smart Operation Integrates Machines into Production Process
April 2, 2018
Siemens’ Smart Operation encompasses work processes surrounding the Sinumerik 840D sl CNC and simplifies the integration of machines into the production process.   New Product Post: 4/2/2018 Edited by Bart Bishop Assistant Editor, Production Machining Siemens’ Smart Operation encompasses work processes surrounding
Moldmaking's Relevance Withstands Time
April 2, 2018
If you asked me what the most important thing is that I’ve learned over the past 20 years it’s that moldmaking still matters. Despite technology and processes changing, moldmaking still matters. “The time has come for a magazine dedicated exclusively to the moldmaker—MoldMaking Technology magazine. Over the past year, our
Cleaner Combines Dry Ice Pellet Production and Dry Ice Blasting
April 2, 2018
Cold Jet says that the Combi 120H eliminates the need for cleaning parts with aqueous methods that require part drying and water treatment or containment systems. New Product Post: 4/2/2018 Edited by Karen Cornelissen Managing Editor, Gardner Business Media
Star Rapid Announces Partnership with Guhring
April 2, 2018
Through this partnership, Star Rapid will implement a new custom tool management and computerized tracking system. Star Rapid, a global rapid prototyping, rapid tooling and low-volume manufacturer, announces a partnership with Guhring, a German manufacturer of carbide and PCD cutting tools like drills, reamers, taps and mills.
Determining the Best Racking Arrangement for Powder Coating
April 1, 2018
Use common sense to figure out the optimum hanging patterns for coating parts, advises powder expert Rodger Talbert. Experts Post: 4/1/2018 Rodger Talbert Columnist, Products Finishing magazine Q. We struggle to find the best hanging patterns on racks. Can you give us some guidelines on how to decide the best racking arrangement? A. The best
Anodizing Chemistry Available in Smaller Packages
April 1, 2018
Reliant Aluminum Products’ Clariant Anodal finishing additives can be purchased in handy, 5-gallon buckets, tailored for small-scale anodizers that don’t require the traditional 55-gallon drum. New Product Post: 3/30/2018 Reliant Aluminum Products is introducing a smaller packaging size for its Clariant Anodal finishing additives,
How to Minimize Fading of Anodized Colors
April 1, 2018
All color-anodized parts fade, but if the process is optimized, you can expect years with minimal loss in color, says Reliant Aluminum Products’ Mark Jozefowicz. Experts Post: 4/1/2018 Mark Jozefowicz Vice President of Technical Services , Reliant Aluminum Products Q. One of our customers recently complained that the color of parts we
Black Oxide Finish Prevents Rust, Resists Galling
April 1, 2018
The Tru Temp low-temperature black oxide process from Birchwood Technologies is well-suited for applications such as oil and gas drilling components. New Product Post: 3/30/2018 The Tru Temp low-temperature black oxide process from Birchwood Technologies is designed to offer robust corrosion protection and break-in lubricity while resisting
Airless Spray Gun Has Ergonomic Design Features
April 1, 2018
Titan’s RX-Apex airless spray gun features an “all-day” trigger system designed to minimize operator fatigue, reducing trigger pull force and the force required to hold the trigger open. New Product Post: 3/30/2018 Titan’s RX-Apex airless spray gun features an “all-day” trigger system designed to minimize
Compounds Are Key to Mass Finishing Success
April 1, 2018
These chemical additives can help degrease, brighten, polish, protect against corrosion and provide stain resistance, and they keep the entire finishing process clean by continuously flushing out contaminants.Experts Post: 4/1/2018 Marty Moga Process Lab Manager, Rosler Metal Finishing Q. We are having some issues with our mechanical
Powder Coating Architectural Products
April 1, 2018
Architectural powder coatings are engineered to meet three different levels of American Architectural Manufacturers Association specifications, and it is important to consult with suppliers and review Technical Data Sheets to choose the right one for your application.Experts Post: 4/1/2018 Mike Withers Architectural Segment Leader, Axalta
An Electropolishing Family Affair
April 1, 2018
Mother and daughter team up to run a Brooklyn finishing shop that focuses on the medical sector. Electropolishing also is commonly called electrochemical or electrolytic polishing. Control Electropolishing serves industries such as medical, surgical, pharmaceutical, chemical and brewery/beverage. Nancy Zapata, in red, and her husband, Manuel
2018 Top Shops Benchmarking Survey: Finishing Technologies
April 1, 2018
Pilkington Metal Finishing spent about 12 percent of its gross profits on capital expenditures in 2017, which is one reason the shop was selected for recognition in the Finishing Technologies category. Article Post: 4/1/2018 Tim Pennington Editor, Products Finishing magazine From left, Dean Ngo, John Pilkington, Van Pilkington, David
2018 Top Shops Benchmarking Survey: Business Strategies
April 1, 2018
A 98 percent customer retention rate was one reason Electrolizing Corporation of Ohio was selected for distinction in the Finishing Strategies category. Article Post: 4/1/2018 Tim Pennington Editor, Products Finishing magazine From left, Bill Morad, chrome operations manager; Eric Petersen, titanium anodize operations manager; and Greg
2018 Top Shops Benchmarking Survey: Electroplating Data Show Profit Correlations
April 1, 2018
Gardner Intelligence found a distinct relationship between profits and order lead time in the thousands of data points it reviewed. What a difference a day makes. If you are in the finishing industry, that difference can be about a 4 or 5 percent improvement in profitability related to order lead times and
How to Keep a Plating Bath from Slowing Down
April 1, 2018
Alkaline plating baths form carbonates over time, and these carbonates cause the baths to become less efficient, resulting in slower plating speed. Asterion’s Roger Sowinski outlines three options for removing carbonates. Experts Post: 4/1/2018 Roger Sowinski Vice President of Technology, Asterion Q. Why is the plating time in my
2018 Top Shops Benchmarking Survey: H.R. and Training
April 1, 2018
An employee turnover rate of roughly 1 percent explains why Saporito Finishing is being honored for its excellence in the Human Resources and Training category. Article Post: 4/1/2018 Tim Pennington Editor, Products Finishing magazine From left, Jim Logan, Steve Stone, Jeff Rice, Yesenia Valencia, Lily Garcete, Debi Kryger,
2018 Top Shops Benchmarking Survey: Top Shop
April 1, 2018
Hixson Metal Finishing was named the No.1 shop, based on aggregate scoring of the survey components. Article Post: 4/1/2018 Tim Pennington Editor, Products Finishing magazine From left, Douglas Greene, Tianna Martinez and Chris Grapsas. (Photo courtesy of Elbandagji Photography.) There’s a phrase that Hixson Metal Finishing President Douglas
Problem Solved Through New Paint Line
April 1, 2018
Farming equipment maker Meyer Manufacturing improves throughput by replacing an aging system. Article Post: 4/1/2018 Edited by El McKenzie Managing Editor, Products Finishing magazine Joe Repka (left), production engineer manager, and Don Meyer, president, stand in front of one of Meyer Manufacturing’s newest products: a
Upgrading Paint Booth Lighting
April 1, 2018
Light-emitting diode (LED) lights can offer significant advantages in a paint booth, including energy savings, sustainability and safety. Q. Our shop is looking to upgrade our paint booth with LED lighting. Is this an easy upgrade? What recommendations do you have? A. Light-emitting diode (LED) lights have grown in popularity over
Puma SMX Series Adds Lower Turret for Increased Versatility
April 1, 2018
Doosan Machine Tools’ Puma SMX super multitasking turning centers are built for completing complex parts in a single setup. New Product Post: 4/1/2018 Edited by Bart Bishop Assistant Editor, Production Machining Doosan Machine Tools’ Puma SMX super multitasking turning centers have a lower turret for enhanced versatility and
Top Factors Driving the Pickup Truck Market in the US| Technavio
March 31, 2018
LONDON--(BUSINESS WIRE)--Technavio market research analysts forecast the pickup truck market in the US to grow at a CAGR of above 4% during the period 2018-2022, according to their latest report. This market research report segments the pickup truck market in the US into the following products, including full-size pickup truck and small-size and
VinFast: A Vietnamese Auto Startup Living Up to Its Name
March 31, 2018
A Vietnamese start-up auto company is doing what it name implies: VinFast Manufacturing and Trading Company Limited is going exceedingly fast in vehicle development. Blog Post: 3/31/2018 Gary S. Vasilash Editor-in-Chief, Gardner Business Media, Inc. A Vietnamese start-up auto company is doing what it name implies: VinFast Manufacturing and Trading
Leading French Pharmaceutical Company Achieves Full Return on Investment within First Year of
March 31, 2018
An error has occurred. This portlet is unavailable at this time. This site uses cookies. By continuing to browse this Business Wire site (and/or any other Business Wire website), you accept the use of cookies. Learn more
Float Your Air Plugs for Easy Part Alignment
March 31, 2018
One way to design clearance forgiveness into an air plug is to enable some float. Blog Post: 3/31/2018 George Schuetz Director of Precision Gages, Mahr Inc. One of the topics we have often talked about with air gaging is the versatility of the air jet. Due to its small size, it is difficult to find a better way for making multiple-dimension
Perform Line Insert Grades Boost Performance and Reliability
March 31, 2018
The Walter Perform Line of turning tools’s two insert grades, the WPV10 and WPV20, are beneficial to users who have difficulties measuring the tool life of an insert and who change inserts at set intervals. New Product Post: 3/31/2018 Edited by Bart Bishop Assistant Editor, Production Machining The Walter Perform Line of
Injection Molding: Negri Bossi Launches New All-Electric Generation at NPE2018
March 31, 2018
Continuing the trend toward revving up all-electric machines for high-speed packaging and medical markets, Negri Bossi North America, New Castle, Del., is introducing its fourth-generation all-electric machines, the Nova eT series, at NPE2018 this month in Orlando, Fla. The showpiece is a 180-metric-ton model molding four food-container
Thermoplastic Overmolded with Foamed & Solid LSR at NPE2018
March 31, 2018
Negri Bossi molds a ping pong bat of PBT, TPU and both foamed and solid LSR. At NPE 2018 this month, Negri Bossi North America, New Castle, Del., is displaying an example of the Canbio sT servo-hydraulic toggle line (180 to 500 metric tons), recently introduced to North America. These “highly modular” machines have the Tactus
Injection Molding: Engel Brings Economical Line of Chinese-Built Machines to the Americas
March 31, 2018
Engel’s Wintec Chinese subsidiary is introducing electric and servo-hydraulic two-platen machines to the Americas at NPE2018. Chinese-built Wintec e-win all-electric toggles are a lower-cost line from Engel. Chinese-built Wintec t-win servo-hydraulic, two-platen presses are being introduced to the Americas at NPE2018. Previous Next Engel