SÖDERTÄLJE, Sweden--The new Scania marine engine range is based on an exhaust gas aftertreatment system developed in-house, which reduces the emissions of nitrogen oxides. This represents the cutting-edge environmental aspect of Scania’s marine solutions.
In anticipation of a wider adoption of the tough new emissions demands for marine engines that were introduced earlier this year by the International Maritime Organisation, Scania already has tried and tested new marine engine solutions that comply with the new limits.
Under the IMO Tier III regulations that took effect in January, the limit for nitrogen oxide (NOx) emissions ranges from 1.96 to 3.4 g/kWh, depending on the engine’s maximum operating speed. This new limit is a significant reduction from the Tier II range of 7.7 to 14.4 g/kWh.
However, although the regulations do not yet apply outside of the North American and US Caribbean Emission Control Areas, Scania has already prepared itself for the eventuality of the changes taking effect in the wider world.
“To reach these new emission levels, an exhaust gas aftertreatment system is necessary for the engine sizes Scania provide,” explains Mats Fanspets, Manager for Marine Classification at Scania Engines.
Scania has considerable experience of exhaust gas aftertreatment systems. The manufacturer’s Selective Catalytic Reduction (SCR) system is a tried and tested technology that has been used both in engines for trucks and industrial applications. And the NOx limit for Euro 6 trucks and Tier 4/Stage IV industrial applications is 0.40 g/kWh, comfortably within the new emissions requirements.
As a part of its existing modular system, Scania’s IMO Tier III-compliant engine solutions have been developed for applications such as auxiliary engines, for example in conventionally-installed marine generator sets or in a diesel-electric setup for cargo vessels that operate in international waters. The solutions also work with propulsion engines, as well as auxiliary and propulsion engines for vessels operating on inland waterways with low emission requirements.
To achieve an approved installation for marine applications, Scania offers installation recommendations on the dimensions and lengths of piping, the cables needed, and the parts needed for the aftertreatment system. This includes the SCR catalyst, a customised exhaust system, an evaporator for mixing urea and exhaust gas, and a three-way safety valve. The solution is available for Scania’s 13- and 16-litre marine engines.
The product offering is complemented by the Scania service network, with more than 1,900 service points across the world already trained to support customers.
“Scania’s Tier III-compliant engines have the same footprint as the current engine range. So when upgrading from an existing Scania installation, there’s no need to rebuild the engine bed,” adds Fanspets.
Scania is a part of Volkswagen Truck & Bus GmbH and one of the world’s leading manufacturers of trucks and buses for heavy transport applications. Scania is also leading provider of industrial and marine engines. Service-related products account for a growing proportion of the company’s operations, assuring Scania customers of cost-effective transport solutions and maximum uptime. Scania also offers financial services. Employing some 44,000 people, the company operates in about 100 countries. Research and development activities are concentrated in Sweden, while production takes place in Europe and South America, with facilities for global interchange of both components and complete vehicles. In 2015, net sales totalled SEK 95 billion and net income amounted to SEK 6.8 billion. Scania press releases are available on www.scania.com (http://www.scania.com/se)
This information was brought to you by Cision http://news.cision.com